Search
Close
Picture of West Mountain Radio RIGrunner 4010S+ Auto or Manual On/Off Switching
West Mountain Radio RIGrunner 4010S+ Auto or Manual On/Off Switching
  • $179.99
  • Out of stock
  • SKU: RR-4010S-Plus

West Mountain Radio RIGrunner 4010S+ Auto or Manual On/Off Switching

The 4010S+ is the only power strip that has FET controlled automatic or manual on/off switching. 40 amp 12 VDC continuous duty with 10 outlets, one always on "Master" outlet and nine switched outlets. Precision voltage monitoring with visual/audible alarm. Read Full Description
$179.99
Availability: Out of stock
SKU: RR-4010S-Plus

New 4010S+ Features

  • PWRguard shut-off when voltage is out of range
  • (Internal) USB port for setting operating features and the trip points (USB cable not included)
  • Ability to set the master port sensitivity level
  • Remote access to turn ON/OFF via the USB port
  • Optional vehicle timer mode - auto shut off when engine is off after set time (1 second to 18 hours)
  • Optional automatic turn on when vehicle engine starts
  • Jumper for power-saving mode turns LEDs off when unit is off

RIGrunner is the most convenient and safest way to connect all of your 12 volt equipment to a power source. The 4010S is the only power strip that has FET controlled automatic or manual on/off switching. Whatever radio is plugged in to the master jack automatically controls power switching of nine switched outlets. It uses the excellent Anderson PowerPole connectors, standardizing all of your 12 VDC connections.

  • 40 amp 12 VDC continuous duty with 10 outlets - one always on "Master" outlet and nine switched outlets
  • Switched outlets controlled by 90 amp rated FET with temperature and over-current protection
  • Three position control switch turns switched outlets on, off or enables automatic operation
  • Precision voltage monitoring with visual/audible alarm for over and under voltage

Includes

  • Spare Fuse Kit containing 1 ea 1, 5, 10, 15, 20, 30A
  • (4) Rubber Feet
  • (4) 3M Adhesive Pads
  • Owners Manual

DC Power Connections Made Easy

A RIGrunner is the most convenient and safest way to connect all your 12 VDC equipment to a power source. It is a 13.8 VDC power panel that uses the excellent Anderson Powerpole connectors. Standardize all of your 12 VDC connections using the amateur radio ARES & RACES, RSGB, ARRL Powerpole system.

RIGrunners are available for every station and every budget. The table below can assist you while determining which RIGrunner suits your needs. To learn more about specific models, click on the model name within the table.

ModelTotal Max AmperageMax Outlet AmperageNumber of OutletsPrecision Power MonitorMaster Device or Vehicle Detect w/ TimerUSB Charger PortsHorizontal Configuration
4004USB4004USB40404  
2
 
4005400540405    
4005H4005H40405   
4008400840408
Audible Alert 3 LED Status
   
4008H4008H40408   
4010S+4010S+404010
Audible Alert 3 LED Status

Auto Outlet
  
40124012404012
Audible Alert 3 LED Status
   
80128012804012
Audible Alert 3 LED Status
   
4007U4007U40407
Audible Alert, 3-digit voltage current display w/ Auto Shut-off

ON/OFF Push button

1
 
4005i4005i40405   

RIGrunner Features

Anderson Powerpole Connectors Provide Interoperability for Emergency Communications

  • Our Powerpole configuration conforms to the ARES, RACES, RSGB standard, and ARRL recommendation for high current 12VDC connectors.
  • Safe secure, HOT CONNECT, polarized, color keyed, genderless connector system.
  • No messy binding posts, frayed wire connections, black tape or short circuits!
  • A full array of quick change Powerpole power supply, extension and adapter cables available

High Current Capability

  • High current! More than enough 12 V power for your station. Pick the appropriate model
  • Each outlet may be used at full ratings: transceivers, amplifiers or any accessory
  • The 8012 is conservatively rated at 80 amps total with any outlet good to 40 amps
  • Models 40xx are conservatively rated at 40 amps total with any outlet good to 40 amps
  • 4004, 4005, 4008 & 4012 models can use any output jack as the power input with full ratings

Protected with Readily Available ATC/ATO Fuses

  • Each outlet is individually fused with automotive ATC/ATO fuses. Shipped with appropriate fuses installed
  • Fuses are quick change; accessible from the outside using high quality fuse holders
  • ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40 amps

Power Monitoring and Alerts

  • Precision window comparator quick status power monitor, makes a voltage problem obvious
  • LED over and under voltage indicators instantly indicate a problem, without interpretation
  • An audio alert is configurable to alarm on overvoltage or under voltage (both on 4010, 8012, 4012 & 4008 only) or may be disabled.
  • Each fuse has a handy blown fuse LED illuminator to show short circuit problems instantly

RF Suppression

  • RF suppression on each outlet suppresses RF leakage between equipment. Keeps your power supply in regulation

Specifications

Overall Dimensions (maximum, w/o cables)1.4" H x 11.75" (4010S, 8012 & 4012), 9" (4008), 6" (4005) W x 3.0" D
Weight15 1/4 (4010S, 8012 & 4012), 11 1/4 (4008), 6 3/4 (4005) oz.
Maximum total current40 amps (4010S - 4012 - 4008 - 4005)
80 amps (8012)
Maximum single individual outlet current40 amps (fuse protected, all models)
ICAS current rating (fuse limited)37 amps (4010S - 4012 - 4008 - 4005)
74 amps (8012)
Precision comparator window points.11.5, 15.0 Volts (8012, 4010S, 4012, 4008 only)
Metering Accuracybetter than 2% @ 25 deg.C. (8012, 4010S, 4012, 4008 only)
Audible alert SPL output~ 60dB SPL @ 1 meter (8012, 4010S, 4012, 4008 only)
Maximum voltage (meter circuit)32 volts (8012, 4010S, 4012, 4008 only)
Reverse polarity protection (meter circuit)Yes (8012, 4010S, 4012, 4008 only)
4010S Automatic switching threshold.Most radios with appropriate master outlet fuse

Construction

  • Built in USA to IPC-610 commercial manufacturing standards by an ISO9002 facility.
  • Printed circuit board .062 FR4 material, extra heavy 3oz. copper, with greater than 1" wide high current traces.
  • Double sided, plated through holes, solder mask over bare copper, silk screened commercial grade printed circuit board.
  • Enclosure: .062 aluminum, with attractive and extremely durable powder coat painting and clear silk screen labels.
  • Power connectors: exclusively Anderson Power Products Powerpole connectors.
  • Connectors are arranged according to the ARES/RACES standard.
  • Fuses installed are standard ATC/ATO automotive fuses available in 10 values from 1 to 40 Amps.
  • Stainless steel hardware with PEM threaded mounting standoffs.
Customer Reviews
Write a review of this product and share your opinion with others.
Not Good Needs That Special Something Average, Ordinary That's Good Stuff Perfect. It doesn't get any better
The most useful comments contain specific examples about:
  • How you use the product
  • Things that are great about it
  • Things that aren't so great about it