TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Excellent Crimper

This tool provides excellent quality crimps of the power pole terminals at a great value price. A must have if you plan on using power poles.

Was this review helpful to you? Yes No

TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Anderson Powerpole Crimper

I've been soldering these Anderson Power pole connectors for years, (The company I worked for used them by the thousands, every month) I finally decided to buy the crimper from powerwerx. It's not as nice as the commercial duty crimpers at work, but these commercial duty crimpers are on the order of $1000 each. At my current use rate of several power pole terminals a week or so, this tool will likely last decades.

Was this review helpful to you? Yes No

2 of 2 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Excellent applications for R/C

After years of using Deans, EC3/EC5, hard-wiring, etc., I tried the no-solder solution with Anderson Powerpoles and I will never go back. No more lead, fumes, flux, or soldering irons. This crimp tool is a piece of cake to use and takes a fraction of the time that soldering does, and it's virtually fool-proof. I opened the box yesterday and converted 2 LiPo's, 2 ESCs, and my charger all over to powerpoles. It took less than 15 minutes and each crimp succeeded on the first attempt. Crimping creates a better mechanical AND a better electrical connection than soldering does, no matter how well you think you solder.

Was this review helpful to you? Yes No

1 of 1 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	No Nonsense -- very reliable crimps

I started using regular hand crimpers which was a disaster, then I started soldering all my Andersons, which isnt bad but takes time and is inconvenient in the field. I finally broke down and bought this crimper and Im still kicking myself in the rear for not doing it earlier. This crimper will make a very reliable and firm crimp along the full length of the wire insertion barrel. Just make sure to insert the pin so that it rolls into and digs into the stripped wire that was inserted. Great low resistance connection. Just add a little silicon grease when you're done and it is good to go almost anywhere. Im converting my whole operation over to Anderson connectors.

Was this review helpful to you? Yes No

2 of 2 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Easy 1-2-3 your done

Awesome tool, can't crimp improperly and excellent leverage. Strip wire, place crimp connector on end and insert into tool that has depth gage and crimp, that’s it. All that’s left is to snap into Power Pole and you’re done. Fool proof, great investment great tool great connectors. W1JCM

Was this review helpful to you? Yes No

2 of 2 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Exellent Product

This tool works great. It puts perfect crimps on Powerpoles. It is easy to use and gives consistent crimps everytime. I used to solder all my connections but this tool does the job faster and better.

Was this review helpful to you? Yes No

7 of 7 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	An absolute *must have*

One of the most important factors in crimping PowerPoles is ensuring that the crimp does not extend beyond the width of the contact blade. That's almost impossible to do consistently with standard crimpers. The TRIcrimp makes perfect crimps every time (regardless of contact amp rating) and makes PowerPole assembly almost a "no-brainer." If you assemble PowerPoles more than twice a year, you need this tool. When mine isn't on the bench working, it's in my "GO" kit along with a stock of housings and contacts, ready to deploy to any emergency. Larry D. Barr, K5WLF ARES AEC, Erath Co. TX Owner, Rebel Wolf Energy Systems
http://www.rebelwolf.com/

Was this review helpful to you? Yes No

4 of 4 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Best money I spent

This product is the easiest I have ever used. It's built tough for indoor use and outdoor use. It came in handy at field day to fix a couple on p.p.

Was this review helpful to you? Yes No

11 of 11 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	A must have tool if you use Powerpoles

As a broadcast engineer, I use a many crimp tools, and this is a quality tool, well worth the price. Soldering stranded wire, in effect, makes it a solid conductor, right where is flexes the most, making it likely to break. Crimping avoids this problem, and makes a reliable connection. No club should be without one.

Was this review helpful to you? Yes No

6 of 7 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	TriCrimp Tool, a must have.

I just retrofitted all my DC Connections using Power Poles from 15 to 45. Its a real pleasure to be able to interchange equipment using this product as a standard. This tool is a "Must Have" in your toolbox.

Was this review helpful to you? Yes No

10 of 10 people found the following review helpful:
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts

5/ 5	Fantistaic Tool

Just the tool for crimping the Anderson 15amp to 45 amp contacts. I have only made one bad crimp, that was the first one, forgot to read the instructions. All others since then have been perfect.

Was this review helpful to you? Yes No