DescriptionThe Digital Battery Analyzer (model DBA+) is an essential tool for all DC system
installers, technicians and battery dealers. Simple to use, it performs a complete
analysis of battery condition in mere seconds, then displays conclusive data on
a large clear LCD readout.
The DBA+ analyzes 12 and 6 volt lead-acid, gel-cell and AGM batteries of all
types with ratings from 100-2000 CCA or MCA. It provides information on battery
voltage, battery condition and available battery power. This gives you empirical
data to assure your customers that their batteries are fine, or to support your
recommendation that they be replaced.
The unit is housed in rugged ABS plastic, yet is light-weight and compact for
use in cramped battery compartments and portability in tool kits. It comes equipped
with 32" polarity color-coded test leads and quick-connect clamps. The DBA indicates
whether the clamps have proper contact with battery posts.
Single-battery banks or batteries connected singly in series may be tested without
disconnection. Parallel batteries must be disconnected prior to testing.
Clear and concise operating instructions are provided.
Features:
- Analyzes 12 volt and 6 volt lead-acid batteries of all types: flooded, gel-cell
or AGM; deep-cycle or gen/ engine start
- Simple three step test procedure provides a comprehensive analysis of batteries
in seconds. (See Inset.)
- No need to recharge batteries prior to testing; accurate results for batteries
in any state of charge down to 5.5 volts
- Uses sophisticated conductance technology; will not harm or discharge batteries
- Rugged, compact, light-weight case; easy to use even in hard-to-access battery
compartments
- Temperature compensation setting when testing batteries below 32° F
(0° C)
- Handy water-resistant carry-case with shoulder strap provided
Specifications:
- Model: DBA+, Digital Battery Analyzer
- Battery Type: 12 or 6 VDC nominal, lead-acid (flooded,
gel or AGM), deep-cycle or gen/engine start
- Battery Capacity: 100-2000 CCA (Cold Cranking Amps)
- Operating Range: 1.0 - 30.0 VDC
- Input Power: Operates on power of battery under test, down
to 5.5 VDC
- Display Type: LCD
- Temp. Range: 32 - 120° F (0 - 50° C); temperature
compensation provided below 32° F
- Protection: Will not be harmed by accidental reverse polarity
connection
- Case Material: Acid resistant ABS plastic
- Size: 7.7" x 3.9" x 2.4"
- Weight: .1 lb., .544 kg.
- Warranty: Two Years
