Newmar Battery Isolator

Description
These heavy duty isolators allow charging multiple batteries automatically from one or two alternators, and prevent discharge or 'dumping' of one battery into another. Each battery is charged according to its need without overcharging. Rated for 12-48 volt negative ground DC systems. Feature conservatively rated diodes and a rustproof anodized aluminum heat sink case. Models are available for 70, 120 and 165 amp alternators.

Performance Specifications
Operating temperature: -40 to +80° C
Duty cycle: Continuous rating to 50° C Derate linearly to 70% @ 80° C
Temp. rise: 5° C at full rated current (mount vertically for optimum cooling)
Voltage drop: 0.7V @ 50% load, 0.9V @ full load
Note: These battery isolators are not compatible with self exciting alternators. Please consult the manufacturer of your alternator if you are unsure of your configuration.

Model	Alternator Sources	Battery Bank	Max Amperage Input Capacity	Weight		Dimensions Inches			Dimensions Centimeters
				Lbs	Kg	L	W	H	L	W	H
1-2-70	1	2	70	2	.9	3.25	4.5	3.1	8.3	11.4	7.9
1-3-70	1	3	70	2	.9	3.25	4.5	3.1	8.3	11.4	7.9
2-3-70	2	3	70	4	1.8	6.5	4.5	3.1	16.5	11.4	7.9
1-2-120	1	2	120	3	1.4	6.5	4.5	3.1	16.5	11.4	8.0
1-3-120	1	3	120	3	1.4	6.5	4.5	3.1	16.5	11.4	8.0
2-3-120	2	3	120	5	2.3	12.5	4.5	3.1	30.5	11.4	7.9
1-3-165	1	3	165	5	2.3	9	4.5	3.1	22.9	11.4	8.0
Application Note: Battery Isolators may also be used to facilitate N+1 parallel/redundant operation of power supplies. Contact factory.