Chassis Mount, Dust Covers & Reducing Bushings
PPC-1 Powerpole Weather Resistant End Cap
Keep dust and dirt out of the ends of your Powerpoles with this unique weather resistant end cap. Reusable. Dust Cover. Dimensions: 1 1/8" X 3/4" X 7/16"
Keep dust and dirt out of the ends of your Powerpoles with this unique weather resistant end cap. Reusable. Dust Cover. Dimensions: 1 1/8" X 3/4" X 7/16"
$1.49
Retention Clips for PP15/30/45 Powerpole Connectors
Secure your Powerpole connections in the field, shack or mobile installations. These Retention Clips are easy to use and should always be on hand if the chance of Powerpole separation exists.
Secure your Powerpole connections in the field, shack or mobile installations. These Retention Clips are easy to use and should always be on hand if the chance of Powerpole separation exists.
$0.50
BLOK-LOK Clamp for 2 Sets of Powerpoles
Ideal for securing Powerpoles in mobile or high vibration environments.
Ideal for securing Powerpoles in mobile or high vibration environments.
$1.25
BLOK-LOK Clamp for 4 Sets of Powerpoles
Ideal for securing Powerpoles in mobile or high vibration environments.
Ideal for securing Powerpoles in mobile or high vibration environments.
$1.25
2 & 4 Set Powerpole Mounting Clamp Set for PP15/30/45
Ideal for mounting Powerpoles on existing cabinets & housings.
Ideal for mounting Powerpoles on existing cabinets & housings.
$2.49
4 & 8 Set Powerpole Mounting Clamp Set for PP15/30/45
Ideal for mounting Powerpoles on existing cabinets & housings.
Ideal for mounting Powerpoles on existing cabinets & housings.
$2.49
75 amp 2 & 4 Set Powerpole Mounting Clamp Set for PP75
Ideal for mounting Powerpoles on existing cabinets & housings.
Ideal for mounting Powerpoles on existing cabinets & housings.
$2.75
Reducing Bushings for Powerpoles
Optional reducing bushings assure proper fit when crimping contacts to smaller diameter wire sizes. For use with PP75/SB50, PP120/SB120, PP180/SB175 and SB350. Loose Piece.
Optional reducing bushings assure proper fit when crimping contacts to smaller diameter wire sizes. For use with PP75/SB50, PP120/SB120, PP180/SB175 and SB350. Loose Piece.
$1.98 - $3.22
Moisture Proof Splash Boot
Moisture proof your outdoor or automotive connections. The Splash Boot holds 2 sets of Powerpoles in mating male and female rubber boots. The wire input strain reliefs can be trimmed to accommodate various gauges of wire and ensure a tight seal.
Moisture proof your outdoor or automotive connections. The Splash Boot holds 2 sets of Powerpoles in mating male and female rubber boots. The wire input strain reliefs can be trimmed to accommodate various gauges of wire and ensure a tight seal.
$14.99
Chassis Mount for 2 Powerpoles Sets (4 conductors)
Ideal for mounting Powerpoles on existing cabinets & panels. Kit includes (1) Chassis Mount Housing, (2) Red Powerpoles, (2) Black Powerpoles, (4) 30 Amp Contacts, and (1) Retaining Pin. Available assembled or unassembled.
Ideal for mounting Powerpoles on existing cabinets & panels. Kit includes (1) Chassis Mount Housing, (2) Red Powerpoles, (2) Black Powerpoles, (4) 30 Amp Contacts, and (1) Retaining Pin. Available assembled or unassembled.
$8.99
Chassis Mount for 4 Powerpoles Sets (8 conductors)
Ideal for mounting Powerpoles on existing cabinets & panels. Kit includes (1) Chassis Mount Housing, (4) Red Powerpoles, (4) Black Powerpoles, (8) 30 Amp Contacts, and (2) Retaining Pins. Available assembled or unassembled.
Ideal for mounting Powerpoles on existing cabinets & panels. Kit includes (1) Chassis Mount Housing, (4) Red Powerpoles, (4) Black Powerpoles, (8) 30 Amp Contacts, and (2) Retaining Pins. Available assembled or unassembled.
$13.99
Plug with Latch for Chassis Mount (HS-4)
Ideal for quick disconnects from cabinet & panel mounts using the Chassis Mount (HS-4). Kit includes (1) Plug w/ Latch Housing, (2) Red Powerpoles, (2) Black Powerpoles, (4) 30 Amp Contacts, (1) Retaining Pin, and (1) Hardware Kit. Comes unassembled.
Ideal for quick disconnects from cabinet & panel mounts using the Chassis Mount (HS-4). Kit includes (1) Plug w/ Latch Housing, (2) Red Powerpoles, (2) Black Powerpoles, (4) 30 Amp Contacts, (1) Retaining Pin, and (1) Hardware Kit. Comes unassembled.
$8.99
Plug without Latch for Chassis Mount (HS-4)
Ideal for quick disconnects from cabinet & panel mounts using the Chassis Mount (HS-4). Kit includes (1) Plug without Latch Housing, (2) Red Powerpoles, (2) Black Powerpoles, (4) 30 Amp Contacts, (1) Retaining Pin, and (1) Hardware Kit. Comes unassembled.
Ideal for quick disconnects from cabinet & panel mounts using the Chassis Mount (HS-4). Kit includes (1) Plug without Latch Housing, (2) Red Powerpoles, (2) Black Powerpoles, (4) 30 Amp Contacts, (1) Retaining Pin, and (1) Hardware Kit. Comes unassembled.
$8.99
Plug with Latch for Chassis Mount (HS-8)
Ideal for quick disconnects from cabinet & panel mounts using the Chassis Mount (HS-8). Kit includes (1) Plug w/ Latch Housing, (4) Red Powerpoles, (4) Black Powerpoles, (8) 30 Amp Contacts, (2) Retaining Pins, and (1) Hardware Kit. Comes unassembled.
Ideal for quick disconnects from cabinet & panel mounts using the Chassis Mount (HS-8). Kit includes (1) Plug w/ Latch Housing, (4) Red Powerpoles, (4) Black Powerpoles, (8) 30 Amp Contacts, (2) Retaining Pins, and (1) Hardware Kit. Comes unassembled.
$13.99
AX7-C Connector Lubricant and corrosion inhibitor New
Apply AX7-C connector lubricant anti-corrosion protectant to any electrical contacts to dramatically improve the reliability of even the best electrical connector contacts by corrosion. Easily apply with the included fine bristled applicator brush.
Apply AX7-C connector lubricant anti-corrosion protectant to any electrical contacts to dramatically improve the reliability of even the best electrical connector contacts by corrosion. Easily apply with the included fine bristled applicator brush.
$11.99 - $19.99
PP15/30 Powerpole Crimping Tool for 15 & 30 Amp
Our inexpensive stake style crimping tool works with 15 & 30 amp Powerpole contacts. For years we have been searching for a quality crimper that is also inexpensive. Can also be used as a wire stripper and cutter and has cushioned slip resistant handles.
Our inexpensive stake style crimping tool works with 15 & 30 amp Powerpole contacts. For years we have been searching for a quality crimper that is also inexpensive. Can also be used as a wire stripper and cutter and has cushioned slip resistant handles.
$12.99
TRIcrimp, the ideal Powerpole Crimping Tool for 15, 30 and 45 amp contacts
Exclusively designed to provide a positive crimp on the Anderson Power 15, 30 & 45 amp contacts. Crimp 15, 30 and 45 amp contacts in one tool. Crimper for Anderson Power Products.
Exclusively designed to provide a positive crimp on the Anderson Power 15, 30 & 45 amp contacts. Crimp 15, 30 and 45 amp contacts in one tool. Crimper for Anderson Power Products.
$39.99
SB175 Connector Handle Kit with Hardware
Makes powerpole separation easy for SB175 series power connectors. Kit Contents: 1 Handle, 4 Screws, 4 Nuts, 4 Lockwashers
Makes powerpole separation easy for SB175 series power connectors. Kit Contents: 1 Handle, 4 Screws, 4 Nuts, 4 Lockwashers
$5.42
SB350 Connector Handle Kit with Hardware
Makes powerpole separation easy for SB350 series power connectors. Kit Contents: 1 Handle, 4 Screws, 4 Nuts, 4 Lockwashers.
Makes powerpole separation easy for SB350 series power connectors. Kit Contents: 1 Handle, 4 Screws, 4 Nuts, 4 Lockwashers.
$5.78
SB50 Connector Red Handle Kit with Hardware
Makes powerpole separation easy for SB50 series power connectors. Kit Contents: 1 Handle, 2 Screws. Color: Red.
Makes powerpole separation easy for SB50 series power connectors. Kit Contents: 1 Handle, 2 Screws. Color: Red.
$2.73
SB120 Connector Red Handle Kit with Hardware
Makes powerpole separation easy for SB120 series power connectors. Kit Contents: 1 Handle, 2 Screws. Color: Red.
Makes powerpole separation easy for SB120 series power connectors. Kit Contents: 1 Handle, 2 Screws. Color: Red.
$3.39
SB175 Strain Relief Cable Clamp Kit with Hardware
Provides strain relief for the Anderson Power SB175 series. For use with 4 to 1/0 gauge cable. Cold rolled steel, zinc plated. Hardware kit includes one machine screw, one nut and one lock washer.
Provides strain relief for the Anderson Power SB175 series. For use with 4 to 1/0 gauge cable. Cold rolled steel, zinc plated. Hardware kit includes one machine screw, one nut and one lock washer.
$2.55
Corrosion Proof Safety Boot for SB50 Amp Housings
Provides strain relief for cables and protects from corrosion, acid, chemicals, salt, dirt and water. Adjustable cable ports cut to fit cable gauge.
Provides strain relief for cables and protects from corrosion, acid, chemicals, salt, dirt and water. Adjustable cable ports cut to fit cable gauge.
$2.71
Corrosion Proof Safety Boot for SB175 Amp Housings
Provides strain relief for cables and protects from corrosion, acid, chemicals, salt, dirt and water. Adjustable cable ports cut to fit cable gauge.
Provides strain relief for cables and protects from corrosion, acid, chemicals, salt, dirt and water. Adjustable cable ports cut to fit cable gauge.
$3.71
Corrosion Proof Safety Boot for SB350 Amp Housings
Provides strain relief for cables and protects from corrosion, acid, chemicals, salt, dirt and water. Adjustable cable ports cut to fit cable gauge.
Provides strain relief for cables and protects from corrosion, acid, chemicals, salt, dirt and water. Adjustable cable ports cut to fit cable gauge.
$4.25
